New Stiler RĘBAK TARCZOWY BX 62, TRACTOR WOOD CHIPPER 15CM

STILER BX 62 WOOD chipper

The BX 62 WOOD CHIPPER is characterized by high strength and durability. The chipper blade is equipped with 4 double-edged knives which ensures high machine efficiency.

The drive is transferred from the tractor through the power take-off shaft (PTO). An additional advantage is the universal three-point suspension system (TUZ) that fits all tractors.

The massive shield allows us to crush branches with a diameter of 15 cm (up to 25 cm with roots).
Technical data:

    Model: BX62
    The size of the shredded material: 15cm in diameter (maximum 25cm with roots)
    Drive system: Drive from tractor engine transmitted by PTO
    Minimum tractor power: 30 hp
    Rotor size: 740 mm
    Rotor thickness: 20 mm
    Number of cutting knives: 4 + 1 counterblade
    Knife type: Hardened tool steel CR12
    Mounting system: Three-point suspension system (three-point linkage)
    Dimensions (with folded hopper): 127 cm D x 132 cm S x 188 cm W
    Batch hopper: 50 x 50 cm
    Rotation range of the ejection tube: 360 °
    The height of the ejection tube: 188cm
    Nominal revolutions per minute / Nominal revolutions: 540-1000
    Chipper weight: 350 kg

FREE PTO !!!

Specification:

    The chipper has a massive disc with a diameter of 740 mm and a thickness of 20 mm.
    There are 4 cutting blades on both sides, sharpened 240 mm x 60 mm.
    In addition, the shield shield is secured against a knife.
    The construction of the rotor allows for long-term work without loading the tractor.
    All bearings protected against dust, stripping, etc. are lubricated by easily accessible calendars.
    On the disc there are also breakers (shovels) shredding the obtained framework to the value of 20-60 mm.
    The chipper with a three-point suspension system is designed for cooperation with a farm tractor with a minimum power of 30 km.
    The drive from the tractor to the chipper is transferred by means of a transmission shaft equipped with a safety pin, which is cut in the event of too much load on the machine and disconnects the direct drive.
    The chipper is additionally equipped with shield ventilation.
    Optionally, a special PTO shaft with protection.
    Thanks to the mounted ball holder, it is possible to attach a light trailer to the chipper.

The drive is transferred via the power take-off (PTO). The minimum required rotation of the roller is 540 rpm.

The shield is equipped with 4 knives. Each of them is double-sided, which extends their lifetime twice. Knives are made of tool steel. The chips obtained have dimensions of 20 - 60 mm.

In addition, the shield has shovels and breakers. Thanks to this, the chips are transmitted to the hopper more effectively.

The rotating spout allows us to direct the jet in any direction.

The fold-up hopper facilitates the transport of the machine. A particularly useful option in orchards and in areas with dense afforestation.